 The uniforms should be washed immediately after each use if at all possible, in cold water.
The rinse cycle should likewise be set for cold water.
We recommend using a detergent similar to Tide® for Coldwater.
Prior to washing, turning the garments inside out will help preserve the twill or Perma-print lettering.
Do not wash uniforms with other items, such as towels.
DO NOT USE CHLORINE BLEACH!
Heavily soiled garments (grass, dirt, clay mud), pre-treatment is recommended
- Spray on products such as Spray 'n Wash® or Shout® and leave on about 15 minutes to absorb before washing.
- Products such as Stick Stain® or Shout Gel® can be rubbed on stubborn stains and left overnight for washing the next day as well.
- For blood stains, it is best to rinse in cold water as soon as possible, and if necessary, soak in cold water before washing. One of the above pre-treatments can also be used, or an oxygen based laundry booster such as Oxy Clean® can also be used for blood stains.
- An oxygen based laundry booster such as Oxy Clean® can also be used to eliminate odor.
- For ink stains, use hair spray. Simply spray on and rub until the ink is gone. Then wash as normal.
DO NOT OVERLOAD WASHER.
Remove uniforms immediately after washing and hang dry all garments if at all possible.
DO NOT DRY UNIFORMS ON HIGH HEAT
If you must use a dryer, use a damp dry or air dry setting. High heat can cause shrinkage, perma-print ink to crack, twill to wrinkle, etc.
DO NOT OVERLOAD THE DRYER
The uniforms will stick together, especially those with perma-print ink.
Remove the garments immediately after the dryer has finished.
DO NOT DRY CLEAN OR IRON
To avoid static and lint build-up, use an anti-static agent such as Bounce® Dryer Sheets.
Store in a cool, dry area, protected from sunshine and fluorescent lighting.
Help your uniform remain the "Mark of a Pro"® and the "Finest in the Field"® | 
